Monday, February 11, 2013

A Step-By-Step Tutorial/Beginners Guide to Konad Stamping.

Hi lovelies!

Thank you all for your compliments on my first attempt at a Konadicure (Konad stamping)! There were so many questions and comments about the stamping method that I thought I'd attempt to put together a beginners guide to stamping, together with photos.

For those who haven't heard of Konad before, it is a brand that revolutionized easy nail art by allowing for imprinting of pre-designed images on nails. There have been many offshoot/knock-off brands but most are said not to be as good as the original Konad ones. Do keep in mind that I'm only a beginner myself, but I thought this tutorial might help others who are interested in picking it up, or who are also new to Konad stamping.

As I mentioned before, I'd been wanting to get into it for a while but wasn't sure where to purchase from. As a result, I was quite interested when I came across an ICNA (International Creative Nail Art) stall at last year's Royal Melbourne Show. ICNA are the importers and main distributors of Konad sets in Australia, and are therefore a legitimate source of original Konad supplies/accessories.

The kit I picked up is called the Royal Australia Gold Set, and contains six Konad polishes (white, black, gold, blue, green and red), the double ended stamper, a polish pen to clean up cuticles, a metal scraper and three stamping plates (M4. M57 & A1).




To begin, you will need to get the following items ready:
  • Basecoat (I used Poshe)
  • Your chosen base polish color (I used Revlon Iced Spice)
  • Topcoat (a quick dry one is best, I used Poshe)
  • Cotton pads/balls and cotton buds
  • Nail polish remover
  • A nail buffer.
  • Old newspaper (to act as a work surface).

Items needed for successful Konadicure!

You will also need a Konad stamping plate, stamper, and a metal scraper.

L-R: Konad black polish, design plate M4 and scraper.
 
Preparation.

Cover your workspace with newspaper before beginning so you don't make a mess. Also soak some cotton pads/balls in polish remover for later use so you don't accidentally ruin your manicure while stamping.

Choose your stamping plate and lay it down over newspaper. If the front of the plate (the metal surface), is covered with a plastic strip protecting the designs, make sure you remove it. There is a paper backing on the underside of the plates, leave that on as it prevents the plates from being too sharp to handle (I accidentally almost pulled mine off - lesson learned).

Step 1.

Paint your nails as you ordinarily would, finishing with a quick dry topcoat like Poshe or Seche Vite. Your manicure needs to be completely touch-dry before you begin stamping or you will ruin it and need to start over, so quick dry topcoats will help harden your polish and act as barrier when stamping (more on that later).

My chosen base shade, Revlon Iced Spice.


 Step 2.

Choose a Konad polish, and apply it to your chosen image on the stamping plate. Make sure that the entire design is completely covered with polish. You shouldn't have to apply too much, a few brushstrokes should suffice.

Apply Konad polish to the design.

Cover the design with adequate polish. Make sure no polish
gets on the adjacent designs.

Step 3.

Grab your scraper, and holding it at a 45 degree angle, firmly pull the scraper over the design and off the plate to remove excess polish. You should be left with a clean design. If you apply too much pressure, you'll pull some of the polish out of the design, but if you apply too little, you won't be able to get a clean design for stamping. Work fast or the polish will dry up, making it hard to transfer to your nail.

Scrape at a 45 degree angle to remove excess polish.

The plate should look like this after you have scraped off the
excess polish.

Step 4.

Once you've completed Step 3, grab your stamper and gently roll it over the design in a back and forth motion, to pick up the pattern. If you are having difficulty picking up the design, grab a nail buffer and gently buff the surface a couple of times, before trying again. Roughing it up makes it much easier for the imprinted polish to adhere to the rubber surface of the stamper. If you have trouble picking up the entire design, just wipe it off the stamper with a cotton pad dipped in polish remover and start over again.

 
Pressing the design onto the stamper.

Step 5.

Once you have the design safely on your stamper, it should look something like this. If you get a bit of transfer, as noticed at the bottom of the stamper, just tidy up with some polish remover on a cotton bud before stamping on your nail.

What a clean design transfer should look like.


Apply it to your nail surface with a gentle, rolling motion, similar to the one you used in Step 4 to pick up the design from the plate. The small patterns are easier to do than the full nail patterns as there's less room for error.

Stamping the first finger!

If some of the stamped polish gets on your cuticle, don't worry about it, as we'll be cleaning up in later steps. If you find that some of the stamped design doesn't lie flat on your nail, gently press down with your fingertip to smooth it down.

If you make a mistake, don't worry. Gently pass a cotton pad dipped in remover over the nail surface. The stamped design always comes off very quickly and easily, so if you applied topcoat in Step 1, you will find that you can clean up a mistake without ruining your base manicure.

Step 6.

Now that you've done one nail and are ready to move on to the next, make sure you clean the scraper, stamp plate and the surface of the stamper so there is no transfer between nails. Always start with a fresh set (i.e. fill the design, scrape it, stamp it and then transfer it to your nail) with each nail, or you will have difficulties getting a clean design each time. Once you're more experienced with stamping, you can cut a few corners, but for now, it's best not to skimp on effort!

Clean the stamp plate before moving on to the next nail.

Clean the residue off the scraper.

Clean the residue off the stamper.
 
Step 7.

Once you've stamped all your nails, you should have something that looks like this.

My mixed design Konadicure!

It's now time to protect your stamped polish with a layer of topcoat. I waited about 10 minutes after applying my Poshe topcoat and I still had a bit of smudging with the stamped polish (boo!). Oddly enough, I didn't have this problem when working with my Valentine's Day manicure, so it could just be the consistency of the black Konad polish or perhaps the design used for this tutorial.

I think it's best to apply topcoat before cleaning up (step 8), as the topcoat acts as a barrier that prevents you from accidentally removing too much while cleaning your cuticles.

Step 8.

Last but not least, it's time to tidy up your manicure. If you have the polish remover pen that came with the set, use that, otherwise, a cotton bud dipped in polish remover works just as well!

This is what I ended up with when I finished this tutorial.

Once you've completed the steps outlined above, you're done! Sit back and enjoy your beautiful new manicure.

In shade.

In sunlight.

In daylight.


Further tips and information:

  • It's best to use Konad polishes when stamping as they are have thicker viscosity, higher opacity and are better for transferring from design plate to nail surface. You can also use normal polish but you might have to experiment a little to ensure they stamp well. Old polishes are also good to use as they thicken up after a while.
  • My metal scraper has put quite a few scratches on my plate, even after one use! I've heard that you can also use a stiff plastic card like an identity card or old credit card, which shouldn't scratch your plate as much, but have yet to try it out.
  • I think the Konad sets are great value for beginners as everything is provided at a more affordable rate than purchasing each item separately, and you can build on your collection as you gain more experience.
  • The dual ended scraper is great as you can use the smaller end for small designs, and the larger end for the full nail designs.
  • Some of the full nail designs are too small for people with long nail beds, like me. The tiger stripe design I used above left the tip of my thumb bare, which is why I decided to use a different design on my thumb. Some designs are easy to stamp on twice but others are difficult to align accordingly. If anyone has tips on this, I'd love to hear it!
  • You can purchase stamping plates from other brands at a lower rate, but I have heard that they can be a bit tricky to work with. Bundlemonster is another brand that comes to mind, they are said to be less expensive but almost as good in quality as Konad. Good old eBay is also another option (and if anyone knows of any recommended sellers, I'd love to hear it).
  • Research tells me that the Konad brand topcoat is the best topcoat to use for a Konadicure as it prevents smudging. I'm very tempted to purchase this and would welcome any advice on the matter!

The set that I purchased above is priced at $69 on the ICNA website, although I believe I paid less as it was on a promotion during the Melbourne Show (can't recall exactly how much I paid, though!). If anyone is interested in purchasing a Konad set from ICNA, you can visit their website by clicking here. They have also thoughtfully provided me with a discount code for my readers, ICNA9394, which allows for a 25% discount on all purchases above $50 (excluding those from the sale/wholesale section). I won't be receiving any benefit from sharing this code, beyond the satisfaction of knowing I helped save you some money!

That's it for now, lovelies! I hope this answered all your questions, please feel free to leave me input in the comments to let me know if you found this tutorial useful, or if you have further questions I haven't addressed!

Much love,
MM.
x

27 comments:

  1. Thanks Coconal. This has been really helpful and gave me an idea of what stamping is about.

    ReplyDelete
    Replies
    1. My pleasure, Kellie! I'm so glad you found it useful!

      xx

      Delete
  2. Thanks for this tutorial and also where to purchase them. I've seen these around, but didn't know an authentic retailer.

    ReplyDelete
    Replies
    1. My pleasure, Lu, I had the exact same problem! If you do end up purchasing a set, I'd love to see photos of what you come up with! Feel free to post to my Facebook page anytime!

      xx

      Delete
  3. Brilliant blog Coco darl - gosh I might even get into this myself ha ha! LOVE your mani, that Iced Spice is on my list :-)

    ReplyDelete
    Replies
    1. Thank you, Kat sweetie!

      It really is quite easy to get the hang of once you get used to it, and with your flair for color combinations, I think you will do a fab job!

      Please let me know if you go for it, I'd love to see what you do! :)

      xx

      Delete
  4. Thanks for the tutorial! Looks pretty easy to do and fun too! Might give that a try. Or I think my girls might.

    ReplyDelete
    Replies
    1. My pleasure, Norlin!

      I'd love to see what you and/or your girls come up with!

      The possibilities are endless!

      Keep in mind though, it's addictive! :)

      Delete
  5. Excellent tutorial lovely! I may look into getting a set!

    ReplyDelete
    Replies
    1. Thank you, Tara, it took me a bit longer to get it sorted out then I thought it would! :P

      It also ended up being quite a bit longer, so thank you for reading all the way through!

      Delete
  6. Thank you for such an informative post! I really want to try out nail stamping one day, it looks so beautiful :)

    ReplyDelete
    Replies
    1. My pleasure, I would love to see what you come up with!

      xx

      Delete
  7. Love the end result, its simple but so pretty and effective. I've been wanting to try out Konad since I saw it on Youtube about 4 years ago but I always hold back. Maybe this year haha?

    ReplyDelete
    Replies
    1. I'm the same as you, and it even took me months to give it a go after I purchased it!

      Having said that, I've tried it twice this week already, lol!

      xx

      Delete
  8. I'm a fan of nail stamping too:)
    Thank you for these, I'll resign from the salon nail stamping. I'll do it myself.
    abiriza.blogspot.com

    ReplyDelete
    Replies
    1. It's gorgeous, isn't it, Riza?

      My pleasure. I think this is more cost efficient AND satisfying. :)

      xx

      Delete
  9. Your nails look amazing! Such a cool look and thanks for giving us such an indept explanation of all that is involved X

    ReplyDelete
  10. Adorable..your approach inspires me a lot...

    ReplyDelete
  11. Fantastic post! I have a cheapie nail stamping kit I got a while back but it does the job :) I totally know what you mean about not removing the sticky piece of paper. I did and ended up cutting myself! OUCH!

    ReplyDelete
    Replies
    1. It's funny how we make silly mistakes sometimes, isn't it?

      I do hate sticky tape/backing on all my products, it's a pet peeve of mine!

      xx

      Delete
  12. Thanks for sharing, this must have taken a lot of effort to take photos of the steps at the same time applying the nail polish. I read through all the steps and fully understood the process, it was so interesting! And lovely pics of steps, the results look gorgeous!

    ReplyDelete
    Replies
    1. My pleasure, thought it might come in handy for other newbies like myself!

      I must say that I didn't realise just how long it was until I finished!

      xx

      Delete
  13. Great Post. I admit I had no idea what this was before reading your tutorial! I have really short nails so don't know if it would look great on me. That's for spending so much time on this!

    ReplyDelete
    Replies
    1. Thank you!

      I think the beauty of Konad is it looks gorgeous on everyone, long/short nails!

      You should definitely give it a go. :)

      Delete
  14. Thanks for the great tutorial Coconal!! Finally, I now know how to use those metal plates! haha
    I'm still restraining myself to buy a beginner's set as I can see it can be very addictive! ;)

    ReplyDelete

Share your thoughts?

Related Posts Plugin for WordPress, Blogger...